Loading... Please wait...

Engraver.com Case Folder Engraving Kit 1

Hover over image to zoom

  • Engraver.com Case Knife Engraving Kit 1 including the knife with a Tira Mitchell Scroll Design applied, graver, graver tip model, practice plate (with design) and study casting (shown inked).  Shown with an actual engraved knife (not included)
  • Engraver.com Case Knife Engraving Kit 1 including the knife with a Tira Mitchell Scroll Design applied, graver, graver tip model, practice plate (with design) and study casting (shown inked).
  • Engraver.com Case Knife for Engraving Kit 1 with a Tira Mitchell Scroll Design in progress
Tira Mitchell
$125.00
Shipping:
Calculated at checkout

 Product Description

Deluxe Case Folder Engraving Kit with a Tira Mitchell Scroll Design

This is a great kit for people who are serious about learning to engrave.  Starting with a solidly built Case folder, we apply a beautiful scroll design by Tira Mitchell.  We apply the pattern using a proprietary method that is both durable and easy to remove once you are done engraving.  This makes it easy to customize an engraving or correct for mistakes without leaving markings on the project that would be hard to remove when you are done engraving.

Along with the folder, you get the graver you need to engrave.  For use with an EnSet or any other power assisted engraving system, this square graver blank is made specifically to cut stainless steel.  It will not fracture like a carbide, nor will it dull as fast as a typical high speed steel graver.

To shape and sharpen the graver, we include instructions and an Engraver.com Graver Tip model.  The resin model makes it easy to see what your graver tip should look like after you shape and sharpen it.

Before you cut your the main project, we also include a mild steel practice plate with the same pattern.  This plate will give you a chance to test your graver and warm up your skills before cutting the folder.  The practice plate’s steel is a little softer than the stainless steel, but it is still a great way to work out kinks before cutting your project.

Finally, we also provide an unblackened Study Casting of an engraved practice plate with Tira’s design.  The plate shows how Tira shaded her design and can be used as a pattern guide if the pattern gets obscured while you work on it.

Kit contents include:

  • Case Lockback – 3.25 inch closed with engravable brushed Stainless Steel sides (approximately 2 inch Locking Drop Point surgical stainless steel blade)
  • Tira Mitchell Scroll Design applied to both sides using a proprietary transfer method that will hold up to normal handling yet can be easily cleaned after the pattern is engraved
  • Engraver.com HSS Graver blank – specially made to cleanly cut stainless steel
  • Mild steel practice plate with Tira Mitchell Scroll Design applied so you can practice cutting the pattern before cutting the project
  • Engraver.com Graver Tip model for 90 degree Flat/Square Graver along with written sharpening instructions so people can see how Tira recommends sharpening the graver for this project
  • Study Casting of finished Tira Mitchell Scroll Design engraving to use as a reference for shading and pattern transfer in case the pattern applied is obscured during handling

Beyond this kit, engravers will need an EnSet or other power assisted engraving system, a means of holding the folder like a ball vise, and/or fixtures to hold/protect the project while engraving, and a shaping/sharpening system to sharpen your graver.

Register here for More Information About This Kit:

 

 

Vendors Other Products

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

What's News

newsletter

Follow us on

Copyright 2019 Precision Artistry LLC. All Rights Reserved.
Sitemap | BigCommerce Themes by PSDCenter

Click the button below to add the Engraver.com Case Folder Engraving Kit 1 to your wish list.