115 Degree Engraver.com Sharpening System Set

The Flare Cut Sharpening Set is here!

Turn any graver into a 115 degree graver with parallel heels.

The 115 degree graver is especially good at bright flare cuts.  It has a true 115 Degree cutting tip, which is typically wider than the tip you get from putting heels on a 120 Degree pre-shaped graver.  The V tip makes it easier to control than a flat graver, and you can get extraordinarily flashy cuts without cutting too deep.

You don't have to learn complicated geometry any more to turn any graver into a 115 degree graver with 15 degree heels and a 55 degree face.  Using the Engraver.com Sharpening System, you can shape, sharpen and polish any graver accurately and repeatedly.

Works with

• High Speed Steel Square Blanks
• Carbide blanks
• Quick Sharp Carbide Micro Gravers
• Repurposed jewelry burs
• Pre shaped gravers that you want to convert

Your gravers can be any length.  Can be used with a powered hone, sharpening stones, or our Engraver.com 5 inch Sharpening Disk Holder with diamond wheels or polishing film.

Once you buy this set, you can expand it with additional graving blocks.

Engraver.com's Universal Collets are required for this sharpening system.  These come with the PulseGraver® or can be added as an option to this set.