Full General Use Graver Slide Fixture System Set

Shape, Sharpen and Polish 90, 105, and 115 degree gravers, with parallel heels

Save money and make the most common gravers used.

You don't have to learn complicated geometry any more to turn any graver into either a 90, 105, or 115 degree graver with 15 degree heels and a 55 degree face. This graver set is our all-purpose graver set.  It is typically the first type of graver taught to new gravers, and it works well in everything from precious metals to stainless steel.  The 15 degree heel lift is high enough to keep your engraving hand from bumping into typical surfaces and is comfortable for most jpeople.

Works with

• High Speed Steel Square Blanks
• Carbide blanks
• Quick Sharp Carbide Micro Gravers
• Repurposed jewelry burs
• Pre shaped gravers that you want to convert

Your gravers can be any length.  Can be used with a powered hone, sharpening stones, or our Engraver.com 5 inch Sharpening Disk Holder with diamond wheels (optional with this kit) or polishing film.

Base Set includes:

• 90, 105 and 115 degree Graver Blocks

Options

• 55 Degree Face Fixer - required to make these gravers.  Purchase if you don't already have one from a different set.
• Tower, Slimmer and Hex Wrench - required to make these gravers.  Purchase if you don't already have one from a different set
• Universal Collet Set - 3 mm, 2.5 mm, and 1.9mm Universal Collets.  This Sharpening System requires you to have your gravers in one of these collets to properly index your graver.  Purchase this set if you do not already have Universal Collets.
• Diamond Wheel Set with 5 inch Wheel Holder- Optional.  The Graver Slide Fixture System can be used with any abrasive surface suitable for grinding and polishing gravers.

Once you buy this set, you can expand it with additional Shaping Blocks.