General Use 90 Set Builder

Turn any graver into a 90 degree graver with parallel 15 Degree heels.

You don't have to learn complicated geometry any more to turn any graver into a 90 degree graver with 15 degree heels and a 55 degree face.  Using the General Use Graver Slide Sharpening Fixture for a 105 Degree graver, you can shape, sharpen and polish any graver accurately and repeatedly.

This is the graver most people begin with.  Simple geometry, durable tip, clean lines and curves.

Works with

• High Speed Steel Square Blanks
• Carbide blanks
• Quick Sharp Carbide Micro Gravers
• Repurposed jewelry burs
• Pre shaped gravers that you want to convert

Your gravers can be any length.  Can be used with a powered hone, sharpening stones, or our Engraver.com 5 inch Sharpening Disk Holder with diamond wheels or polishing film.

Build a set around this single Sharpening Block.  Get only what you need. 

Options include:

• 55 degree Face Fixer - needed to make this graver, but if you already have one, you don't have to buy a second one
• Tower and Slimmer - needed to make this graver, but like the Face Fixer, you only need one
• Set of 3 Collets - gravers need to be in a Universal Collet to properly index in a Sharpening Block, but if you already have them, you don't need more
• Diamond Disks and Holder - economical alternative to a powered hone, but not necessary if you have a hone or a good set of sharpening stones

Engraver.com's Universal Collets are required for this sharpening system.  These come with the PulseGraver® or can be added as an option to this set.