High Attack Graver Slide Fixture System

The High Attack Graver Slide Fixture System is for jewelers and engravers who are working around obstacles or concaves surfaces and need to hold a graver at a higher angle. 

Typically for more experienced jewelers and engravers. These gravers work well in all kinds of metal, balancing a strong point with clean, bright lines while held at a steeper angle to avoid knuckle dragging or colliding with raised surfaces..  Sharpening Blocks make 90, 105, and 115 degree "V" or "Knife" gravers with 20 Degree Parallel Heels.  Works with High Speed Steel and carbiide, round and square blanks.  For use either by hand or with a powered hone.

Universal Collets designed for the PulseGraver are required to use this system.  Universal Collets also fit GRS machines, but GRS collets do not work with this sharpening system.